How Does Submarine Fiber Optic Install Work?

Submarine fiber optic networks are built on the shore, and the cables are delivered to your offshore platform via submarines that can lay the cables on the bottom of the ocean. This is a very safe way for you to maintain communications with your offshore team, and you can create a network that is so fast you will feel like you are using a standard internet connection back home. Continue reading to learn how to create one of these networks and bring out the submarines to handle the installation.

What Does The Submarine Engineering Team Do?

The submarine fiber optic cable installation team must build your cables first. The team will create cables that allow you to connect your offshore rig with an office that is back home. The cables could be hundreds of miles long, and they are built to go the exact distance that you need. Because the cable system is so complex, the cables are built with hundreds of wires that will handle power, voice, data, and the Internet. You cannot rely on wireless or satellite connections when a weird connection is much faster and more reliable.

What Happens At Sea?

The subsea engineering companies that you work with will send out a team with a boat and mini submarines that are known as Remote Operated Vehicles. The ROV will float to the bottom of the ocean where they will deposit the cables on your behalf. The cables will be laid in a place that is very easy to reach again in the future, and the submarines are tracked so that you can see exactly where the cables are located. The cables need to be tracked in case you have problems with the system. Plus, the cables need to be checked for tangles and damage in the future.

Connecting Your System

The team that built your cables will make sure that your network is connected properly. Plus, the team will test the speed of the system. You have been promised a particular speed, and you need to know that you are getting that speed. The company will show you how to run your tests, and you can report any problems in the future if you think the system is not working very well. You should also make sure that your voice calls go through, your Internet connection is fast, and you can use the system for many different things at the same time.

Regular Service

You should work with your installer to get a service plan on the cables. The service plan will send the team out to your location once or twice a year to check the cables. You may need emergency repairs, and that is why you need to have contact information for the installer. You must maintain the system as best you can. Plus, you should immediately report any trouble you or the shore office have had. The boats and submarines need to be sent out as soon as possible to solve these problems before they get worse.

A Final Thought

Your business must invest in safety and efficiency when you are starting a project at sea. The platform cannot be cut off from the land, and that can happen when you are using unreliable wireless or satellite systems. A wired cable system that is sent directly from the shore can help you connect and send voice messages with no trouble. You simply need to work with an engineer who will show you how they build the cables, test the system, and check the cables from time to time. This the best way for you to know you are connected when you send a team out to sea.

Why Do You Need Fiber Optic Cable Maintenance?

You need fiber optic cable maintenance any time you have designed and ordered a fiber optic cable system for your company. You may have a number of off-shore platforms that need to communicate with the shore. Plus, you need to know that these platforms can safely communicate with your shore-based team. The list below explains how you can design and order a new fiber optic cable system. Plus, there is a look at how you can maintain the system so that it will always be in the best possible condition.

What Is A Fiber Optic Cable Network?

A fiber optic cable network for your company will go from the shore to your outpost at sea. These outposts could be very far from the shore, and they simply cannot rely on the wireless or satellite communications that you can use on the land. Because of this, the cables need to travel hundreds of miles across the ocean floor to reach your outpost. If you are new to this design process, you can ask the design company how they will build your network, how the cables are made, and how they will install those cables.

What Are These Cables Like?

You need fiber optic cable maintenance because the cables themselves are extremely complex. Each cable is a system of wires and connections that are all housed in the same place. The cables allow for very fast connection speeds, and you can send information back to the shore in a timely fashion. You will wait for hours at a time if you are using a slow network, and you do not have time to wait. Plus, the network is a safety issue. You need to know that the people on your off-shore rig can reach you quickly in the event of an emergency. Plus, you need to get realtime information from the outpost so that you know it is operating at its peak at all times.

How Do Fiber Optic Cable Installation Companies Work?

The fiber optic installation company that works with will let you know how they can make your network as fast as possible. The company will use your input to build the network that you want, and you can ask them about the timeline for your installation. The installation takes time because the cables much be installed on the seafloor. Plus, you need to get the cables connected to your outpost and an office on the shore. The network can be tested at this point, and you can ask the company to show you what your maximum speed is.

How Do You Get Service And Repairs Done?

Service and repairs need to be done in regular intervals to ensure your network is functioning properly. You can have a yearly service done where the company will check every part of the cable installation. Plus, you can ask the company for emergency repairs when you realize that something is wrong with the system. You can check the speeds on your system, and you can contact the installer for help when your speeds begin to drop for no reason. The cables can be repaired at-sea by an ROV, and your system can be tested once again.

In Conclusion

When you are setting up an off-shore outpost, you need to make sure that you are working with a company that can design your cables, install them, and service them. You want the network to be as fast as possible, and you need to know that it can be repaired when you have issues with your network speeds. Each site in the process ensures you are connected and safe

What Is The Purpose Of Fiber Optic Cable Maintenance?

When you have invested in a massive fiber optic cable network, you must have those cables maintained. You trusted a company to lay cables over hundreds of miles of the ocean floor, but these cables still need service. Service packages should be included with the installation that you receive, and you must send a message to your installer any time you have questions about that signal. You might notice the signal is slowing down, or you might be losing information in transit. Take a look at what the service package can do for you after your cables have been installed.

What Does Fiber Optic Cable Maintenance Entail?

The Fiber Optic Cable Maintenance that you have requested will send a boat back on the water with an ROV to check the parts of the cable system that are not functioning properly. Your installer has gone to great lengths to ensure that they can check different parts of your system for performance, but they need to send a submarine or ROV down to the bottom to ensure that the service is done properly. You will get a report from the engineer, and you can test the system once again.

What Does The Engineer Do?

You will work with a Subsea Installation Engineer who helped to create your network and maintain your signal. This person is your main point of contact when you are working with the service team, and you can have a talk with the engineer about how the network is functioning. The two of you can work to pinpoint problems with the system that you cannot diagnose on your own, and you can ask the engineer how they can upgrade or repair the system. There are times when you need to make a fundamental change to the system, and there are other times when you should simply have the repair done.

How Long Does Service Take?

The installer needs to get a boat and an ROV out to the cable network site to check the lines. You must give your installer time to mobilize their team and send someone to check. The service team will send an ROV down to the bottom of the sea to check the cables with a camera, and they can even use robotic arms to handle repairs to the system. If you have never done service or repairs, you must be patient with the service team. They work as fast as they can to make the network function as it should.

Test the System

The system must be tested when you request a service. The service for your system can be handled fairly easily so long as you test the system on the backend to ensure that it is working properly. You can stay in touch with the engineer while the service is completed, and you can test the system given their parameters. This is a very simple thing to do, and you will save quite a lot of time because you can tell the engineer if heir services or repairs are working. In the end, the service team will stay out there to either repair or service the line until it functions properly.

A Final Thought

You must be patient when your fiber optic cable network is being serviced or repaired. You also have a responsibility to repair any problems you have with the system at once. You need to let the subsea installation engineer know what the problem is, how long it has been going on, and where you have noticed the issue. Sharing information helps both of you come to a conclusion that will see your network restored to full power.

Source

Why Would You Use Submarine Cable Networks?

Submarine cable networks might seem like something out of a futuristic novel or movie, but these networks are used every day to connect land-based offices with their offshore platforms, labs, and floating research vessels. These networks consist of large cables that can send data very quickly to any location on the sea, and the signal can be so fast that you do not need to wait for long periods of time to get the data you need. When you order a new network, you must use all the steps below to get the installation done right.

Where Does The Submarine Cable Network Go?

The Submarine cable network will be put on the ocean floor, but it must be sent down a path that allows it to easily reach your location. You cannot always have the cables sent in a straight line to your facility, and you will see a map of the installation field when it is done. Your installer tracks the entire job from start to finish, and they will give you a map of the cable field when they are done. You may need to give the installation time to see where they will put the cables, and you must allow time for testing once the installation is complete.

How Does Offshore Subsea Engineering Work?

You will request a network that is comprised of cables that can be used for your network, and you will have cables custom made to suit your needs. You have a certain data speed that you want to reach, and you should ask the engineer what they think is feasible. You can request a network that was designed to provide you with enough power to make voice calls, and you can also ask for a network that has been encrypted so that no one can access your information. This may seem like an obvious thing, but you must request a certain level of security when ordering the cables.

The Installation Process

Installation for the cable system occurs when the engineer takes their team out on the water with the cables and a plan for the installation. The boat will follow a pre-determined path to lay out the cables, and a submarine will be used to make sure the cables make it to the bottom. The submarines have cameras that show the engineer and the Submarine cable installation team where the cables went, and a full map of the installation zone is created. You get your cables connected at both ends, and you are given a chance to test the system. The engineer will ensure that your network moves fast enough, and you can test voice calls to ensure they are clear.

This Is More Reliable Than Wireless

You may think that you can use wireless data or satellite technology, but that is not as reliable as a wired signal. The cables that you order are very complex, and they provide you with enough power to send data back and forth without worrying about how many thousands of miles you are from civilization. Because of this, you can save money communicating with your team, keep your staff safe, and collect data in realtime. There is no delay when you are using fiber optics.

One Last Note

You must understand how the installation works before you place your first order. Talk to the engineer about how they will build your cables, how much power you can get out of the network, and where it will be installed. You should learn all the different parts of the installation before it starts so that you know what sort of network you will get.

Source

Who Are Fiber Optic Contractors: What Do They Do?

When you are hoping to install a new fiber-optic system for your offshore rig, you must find a contractor who does all the work for you. You can have the contractor handle a major installation, create a fast network, and maintain that network after it has been created. Ensure that you know what you are buying when you work with these contractors, and remember that the majority of these installations take time because they are done at sea over hundreds of miles. Even the shortest fiber-optic network will cover several miles before reaching its destination.

Fiber Optic Cable Contractors Plan The Network Speed

Fiber Optic Cable Contractors, You will start by working with your installer on speed for the network that you think is appropriate for your company. You must ask the installer how much power they can give you when putting together the network, and the contractor will tell you what kind of cables they need to build to make that happen. You have a specific need when you are ordering these networks, and you should be very specific about how the network will operate. Most people who are using a fiber-optic network are going to get very fast speeds that are even more powerful than the T1 line in an office.

How Do Fiber Optic Installation Companies Work?

Fiber Optic Installation Companies will design your cables, build your cables, and install them at the bottom of the ocean. These cables must lay at the bottom fo the sea so that they can reach their final destination, and they will be connected on both ends so that you can test the speed of the network. When you are connected to your home base, you can begin to communicate with the rig to ensure that they are safe and aware of how the network will function.

The fiber optic installation company must assemble a crew that will use a boat and submarines to bring the cables to the bottom of the ocean. Most people who have this service done for the first time do not realize how long it takes to complete the job, and you must be willing to give your installer time to work around weather out at sea. When you have completed the installation, you can go into maintenance mode so that you know the network is still functioning.

How Do You Get Service?

Service on your fiber optic network must be managed by your installer after all the cables are laid. The service technicians will use submarines to get to the bottom of the ocean to repair the cables, or the cables might need to be moved to a new location to prevent damage. A number of things could happen in the ocean every year, and it is best that you have worked with your installer to understand how to work around problems that are happening right now.

Repairs can be done when you realize that your connection is not as fast as it once was, and you could have an annual service done where a technician will scan the whole of the cable to ensure that it has not been damaged.

The Last Word

The installation that you have done by your fiber optic network company should include an incredible cable that will carry your data as fast as you want, and the installation can be supported by the services that will be provided to you at least once a year. You can get emergency repairs done at any time, and you can work with the fiber-optic network team to ensure that your network is always working at its optimal capacity even at great distances.

Source: h ttps://submarinecableinstallationservices.blogspot.com/2019/08/who-are-fiber-optic-contractors-what-do.html

What Is A Submarine Cable Installation?

Fiber optic cable contractors use Submarine Cable Installation most of the time because a submarine can sink to the ocean floor where it is too dangerous for divers to swim. The submarine is also known as an ROV or Remote Operated Vehicle. These submarines are used to ensure that the cables make it to the ocean floor safely, and they are fitted with lights that give pilots the best view of the area. The cables need to be installed in places that are safe, and you need to know how to return to these places in the future, and the submarine is the simplest solution for such complicated jobs.

What Are These Fiber Optic Cables?

Fiber optic cables can survive at the bottom of the ocean when they are designed for oceanic installation. Fiber Optic Cable Contractors are used for Internet connection and voice connections over long distances. You could use a less-reliable wireless connections or satellite phones, but those devices can be thwarted by wind, rain, cloud cover, and satellite problems. You can trust a wired connection that comes from the shore, but that wire must be pulled over hundreds of miles of ocean to reach your outpost.

The fiber optic cables are dropped on the seafloor using submarines that can sink to the bottom, and the team of people on the boat above will control the submarines with a simple remote. The submarines can see the ocean floor, navigate any obstacles that they encounter, and ensure that the cables have floated to the bottom properly. You must watch the cables hit the ocean floor because they could be dangled or damaged if they were simply dropped in the water.

How Is The Network Connected?

The network is connected by the engineers and installers on both ends of your cables. The network must be powered up, and it will be tested for speed. You require a certain speed if you plan to transmit information in an efficient fashion. Because of this, you must have the network tested at least once a year to ensure that it has not been damaged. You might notice that the system lags from time to time, and it would be wise to ask your installer to check the cables.

Routine Cable Service/Repair

Routine cable service is just as important as the installation. Routine cable service requires that the submarines are sent back to the ocean floor. Your cables can be checked for damage, and they could be repaired by the submarines. The service team will send you a report on all the damage they found, anything that was repaired, and recommendations they might have. The damage could have happened at any time, and it is very important that you take steps to avoid that damage, ask your fiber optic installer for help or change the configuration of the cables.

You Should Consider A Wired Fiber Optic Connection

Routine cable service should be scheduled for the entire year so that you can avoid major malfunctions. The people who work hundreds of miles from home need to be connected at all times, and it would be frightening if they suddenly lost their connection. Plus, you cannot operate the rig properly if you are not connected. Computer system manage so much of the world today that you simply cannot afford to go without your connection for any length of time. Trusting a fiber optic installation team is a simple way to keep your team connected. Also, the submarines used for the installation job can be used for service and repairs. Advanced technology can keep you connected much more easily than any wireless system.

Why Do You Need Fiber Optic Network Design And Service?

Fiber Optic cables and UTP Network cables

Fiber Optic Cable Construction is a requirement when you are ready to set up an off-shore outpost for your company or lab. These outposts are often so far from civilization that you cannot see land, and these locations need a reliable Internet/voice connection. These connections are created using incredibly-strong cables, and the connections are created over land and sea where required. Any company can place an order for a new network that will be designed to offer the most optimal speeds and performance. Once completed, this network is maintained by the engineers that created it. Study the creation of a network as you prepare to invest in this process.

Fiber Optic Network Design Professionals

You need an engineer to create the network on your behalf so that you get a strong signal, cables that will stretch over thousands of miles, and the fastest possible speeds. A Fiber Optic Network Design provides with Internet and voice connection, and this connection is not swayed by the location where you stand, solar winds, when planets are out of alignment, or any other factors that ruin a solid wireless connection. The cables that are laid will reach out to any location, and the cables will be maintained by engineers that created the network. Most of these networks actually go underwater across hundreds of miles of the ocean. These projects are expansive because they require a submarine to lay these cables on the ocean floor along with a maintenance plan that will help keep the network as strong as possible.

Security & Safety For Your Employees

Ordering a new fiber optic network is required the moment you have decided you want to establish a new oil rig or gas exploration platform. Laboratories will need a connection to collect data, and the staff must have a way of reaching the main office if there are every safety or security concerns. The cables are lain underwater in safe places that avoid major pitfalls, and the cables are serviced if there is damage or a slowing in the network.

The Cables Are Powerful

Heavy duty cables are used to create a powerful network that moves extremely quickly in all situations. Most people who are using a fiber optic network such as this are using extremely heavy cables that will hold up under incredible pressure on the sea floor. There are a number of companies that are taking a look at a new network design because they do not like the network they are using. These firms are well within their rights to change to a new network that has been built with better cables, better installation methods, and better engineers. A proper installation should result in an extreme-fast network that will not take much time to transmit information from a remote outpost.

Maintenance Is Key

Maintenance is key because it helps the network remain as fast as it can possibly be. The sea floor is not a hospitable place for any sort of high-tech installation, and the engineers who created the network are duty-bound to maintain the speed and integrity of the network over hundreds of miles of cable. Submarines and subsea work teams are used to ensure the cables are in good condition, and any issues are reported back to the owner of the network. In this way, both parties maintain the network through good communication

A network that is strung from land to an ocean outpost must be built with sensible principles that come from expert engineers. When the network is built with help from a professional crew, that network can protect any oceanic outpost with a powerful voice/Internet connection.

A Guide For Fiber Optic Installation

This image has an empty alt attribute; its file name is pexels-photo-1213973.jpeg

One of the best things about optical fiber is the ease of installation. Unlike other heavy and complex cables for making connections, fiber optic cables are lightweight and flexible to install. The installation process is similar to any wire cable installation, but the methods, tools, and instruments needed to complete the task are different.

Fiber optic cables can be installed for outdoor underground applications or for indoor underwater applications using several different installation methods available. Because there are varieties of cables and the number of applications so there are no practical rules for installation. But some general guidelines that must be followed before all types of cabling are:

In order for your fiber optic cable to function effectively, you must install it correctly. To guide you, here are tips on how to install the unit:

Use The Right Components

The component you use depends on the application. Nevertheless, there are several universal components regardless of the application. These components include:

Patch Panels: They make it easy for you to manage patch cables and connect the cable distribution area. When buying a unit, you must look for a unit that allows you to use different cable connectors in the same patch panel. Experts also recommend that you use a unit with a colored jack or bezel. This is to make it easier for you to identify various ports.

Cable Manager: Cable manager protects the unit from damage. It also provides routing for patch cables. Cable manager consists of two main types: horizontal and vertical. When buying a unit, always ensures that there are no parts that block effective data transfer.

Cable Ties: They put together a group of cables. They also tighten the unit to other components. As a practical guideline, make sure that the bond you buy is of high quality.

Have A Plan

You cannot do a good job if you have no plans for fiber optic installation. For fun, you must have a plan for how you will do it. You have to know where you will start the installation and where you will end. To easily identify the unit, you must create a coloring code. You can use codes on patch panels, fiber cables, color sleeves and connectors.

Perfect fiber optic installation cannot be achieved without adequate tools and accessories. During the installation of fiber optics, there is some special and modern equipment that perform this role easily. Fiber optic cable contractors must have a full set of optical fiber equipment and test equipment. Usually, the tool set contains:

Handling tools such as cable cutters, buffer tube cutters, cable cutters, rip cables, pull eyes and electrical tape.
Splicing tools such as cable jacket stripper, fiber cleaver, tweezers, a polishing puck, plate and pad, fusion splicer and crimper connector
Testing equipment such as fiber optic power meters, test sources, connector adapters, visual trackers, continuity checkers and OTDRs.
Accessories such as O-rings, lenses and tubers for repair and installation of optical fiber bleaching systems.

The fiber optic cable contractors that you hire have a big impact on cable performance. For peace of mind, work with certified and experienced professionals. After installing the cable, it is always recommended that you keep records detailing where different components are installed. This makes it easy for you to solve problems.

Top Subsea Engineering Companies

With so many subsea projects being undertaken today, it is important to single out the right company for your offshore or subsea project. It doesn’t matter if its fiber-optic network design or cable installation, oil and gas exploration, or renewable energy, you need to make the right choice.

To simplify things for you, we’ve done our research and came up with some of the best Subsea Engineering Companies. These are firms with experience, the right expertise, and technology to carry out the most complex offshore projects. They are as follows:

Balmoral Offshore Engineering

Since 1980 to date, Balmoral Offshore Engineering has been offering high quality offshore engineering services for renewable energy, oil and gas, marine and seismic industries. Based in Aberdeen, Scotland, UK, Balmoral Offshore engineering is committed to producing cost-effective high-performance subsea products and providing outstanding solutions that include design, concept development, manufacturing, and testing.

SMD Ltd

Soil Machine Dynamics Ltd (SMD) is one of the top manufacturer’s of remote intervention equipment, operating in risky environments around the globe. Around 90% of the world’s subsea cable burial is performed by SMD equipment. The product line includes the world’s largest range of subsea remotely operated vehicles such as specialist trenching and work-class vehicles. Other tool used includes subsea mining equipment and tidal generation devices.

Ocean Speacialists, Inc.

Ocean Specialists Inc (OSI) is a top system development and advisory company offering global Subsea network solutions for energy, telecommunications, and science. The company is also very experienced in planning, design, implementation, and management of subsea fiber optic networks and Fiber Optic Network Design. So, if you want a reliable firm that will soundly and cost-effectively design your subsea cable network, OSI is the company to choose. OSI has delivered 200 plus subsea cable projects to its global client base, so, they have the necessary experience.

ODE

This is an award winning company and one of the best UK’s top subsea engineering companies. The company won the Queen’s award for enterprise in 2010. It offers consulting, engineering, project management, and operations support services to the offshore oil and gas, and renewable energy industries.

WFS Technologies

Founded in 2003, WFS technologies is a UK based company and a top supplier of subsea wireless technology for communication, navigation, control, and power transfer. WFS delivers Seatooth technologies that improve management of offshore energy assets, reduce cost, increase production, and lower risk. The firm has completed more than 7000 plus Seatooth installations.

FMC Technologies

With its headquarters in Texas, US, FMC technologies is one of the world’s top providers of offshore production systems, technologies, and services. The company serves customers from the energy industry around the globe. It pays attention to expanding its products and service portfolio, more specifically to subsea production and processing systems.

GE Energy

GE Energy is an American energy techniques company, owned by General Electronics. This company is the largest energy techniques and selling Energy Company in the world. It is more focused on Oil and Gas, power and water, and energy management services. The main aim of the company is to expand and strengthen its products and operational portfolio, while at the same time maintaining a strong financial discipline.

Osbit Power

Osbit Power designs, builds, and provides high-quality and cost-effective systems for some of the largest energy companies in the world. The firm specializes in oil and gas, renewable, and subsea sectors. Osbit Power is one of the top suppliers of remote access and walk to work solutions.

Oceaneering International

Oceaneering provides unmatched experience and innovative portfolio of technologies safely and reliably to enhance performance in aerospace, oilfield, material handling, renewable energy, research, and defense applications.

Oceanspecialist An Advisory Firm For All Your Global Sub-Sea Networking Operations!

Oceanspecialist is the leading competitor among the Submarine cable installation companies and has hands-on experience in the planning and managing the sub-sea networking system across the world. Jobs acquainted by Oceanspecialist ensures the premium quality work with technical fiber optic network designs for your Submarine cable installation projects. Along with this, it also aids in various services in the fiber optic industry like customizing the fiber optic network designs according to the needs of Submarine cable installation companies, installation of the fiber optic networks, surveys, procurement, and various other operations. Oceanspecialist rank among the top contenders who have majorly completed 200+ projects and successfully completed 18+ years in the industry. Oceanspecialist core services can be grouped into three different categories that is number one will be the network development sector, second will be the cable maintenance authority sector and lastly, the Engineering and technology sector all these three sectors are inter linked. These three sectors are appreciated by the clients as the in-house services are supported well by the extensive knowledge of the hardworking team and the overall years of experience of sub-sea infrastructure and engineering skills have boosted the business.

Testing the fiber optic network designs and installation of the sub-sea network communication

Oceanspecialist has taken the initiative for designing the number one fiber optic network designs for developing the fiber networking world widely. Their only mission is to provide the high speed communication telecom network which keeps the world connected. From the long list of Submarine cable installation companies, Oceanspecialist offers the best service of installing the fiber optics and offering the total solutions for sub-sea projects and at the same time are skilled to offer conceptual technologies and techniques in cable route planning and in some engineering projects. In addition to this, the in-house team is also trained to provide system focused maintenance solution for the ongoing projects or the installed projects. As the acknowledged market leader Oceanspecialist understands that each project comes with different vision and technicalities hence involving the customer’ s needs is a must that stands firm in testing the business skills for future growth. Ocreanspecialist fiber optic network designs provide the highest capacity, most secure and most reliable form of connection which plays a crucial role in connecting the world. Not only this, the in-house team work honestly to create a significant benefit as the need for developing the sub-sea fiber optic network is an intricate and complicated task. In order to achieve success in establishing the project is in identifying the challenges and opportunities to run the project without any technical issues. Oceanspecialist team takes care of your budget needs as each phase needs different attention and requirements. The progress of the project decides or impacts the project schedule, project cost, and technical risk. Because of this to run the project swiftly each phase needs to be discussed, manages and addressed early in the planning phase of the installation projects or any other projects.